AN/PVS-7

From Night Vision Wiki
Revision as of 11:51, 9 September 2022 by imported>Terminatort80022 (inclusion of collimator pics 9)
black tube with a prism at one end, internal consist of convex lens
PVS-7 collimator assembly, comprising of multiple lens and a triangular prism to duplicate intensifier image from one 10130 tube to both eyes
a series of convex lens of different convex degree and thickness followed by their stabilisation rings
when disassembled, the following components, comprising of lenses and rings would pop out in the following order
for the 1 component, insert the lens with the convex side facing towards the collimator housing
for the 2 step, insert one of the thick metal ring into the collimator housing
for step 3, inset the thick lens, convex side facing towards the collimator housing
for step 4, [1] there will be three components needed to be placed together in a bundle
for step 4, [2], place the metal ring onto a flat surface for convenience
for step 4, [3], place the lens onto the metal ring with the convex side facing towards the metal ring
for step 4, [4] place the thin metal ring onto the lens

Made by Litton Industries.