PNV-10T

Gallery

Storage case
Storage case showing contents
Carrying pouch
Objective side view
Ocular side view
Ocular side view (without eyecups)
3x magnification lens with lens covers
Head harness
External power supply
Vehicle power adapter
External power supply plugged into the vehicle power adapter
Small accessories pouch with batteries and lens cloth
Battery charger
Battery charger (open)
Booklet #1
Booklet #2

Manual

Page

Translation

File:Pnv 10t manual (1).png

DRIVER OBSERVATION NIGHT VISION DEVICE

PNV-10T

Operating Manual

File:Pnv 10t manual (2).png

File:Pnv 10t manual (3).png


Introduction	5
1 Description and operation	6
1.1 Description and operation of the product	6
1.1.1 Purpose of the product	6
1.1.2 Specifications	7
1.1.3 Product composition	9
1.1.4 Design and operation of the product	10
1.1.5 Measuring instruments, tools and accessories	16
1.1.6 Marking and sealing	17
1.1.7 Packaging	18
1.2 Description and operation of the component parts of the product	21
1.2.1 Pseudo-binocular ONA	21
1.2.2 Headband	24
1.2.3 Drying cartridge	24
1.2.4 Nozzle	27
1.2.5 Low-voltage voltage converter	27
1.2.6 Transfer device	32
1.2.7 Cable	34

File:Pnv 10t manual (4).png

1.2.8 Adapter	34
1.2.9 Charger	34
1.2.10 Napkin	41
1.2.11 Case	41
1.2.12 Bag	43
1.2.13 Case	43
1.2.14 Marking and sealing of components	43
2 Intended use	4
2.1 Operating restrictions	47
2.2 Preparing the product for use	48
2.2.1 Safety precautions when preparing the product	48
2.2.2 Scope and sequence of external inspection of the product	49
2.2.3 Preparing the product for use when powered by independent power source	50
2.2.4 Preparing to work with the product from the on-board network	53
2.2.5 Preparing the product for operation with an adapter device	54
2.2.6 Preparation for operation of the product with a nozzle when powered by autonomous power supply	55
2.2.7 Instructions for switching on and testing the operation of the product	55
2.2.8 List of possible malfunctions of the product in the process fits preparation and recommendations on actions in case of their occurrence	56
2.3 Using the product	59
2.3.1 The procedure for operating personnel when performing the tasks of using the product	59
2.3.2 Product health check	59

File:Pnv 10t manual (5).png

2.3.3 List of possible faults in the process use of the product for its intended purpose and recommendations for actions when they occur	60
2.3.4 List of product operation modes	63
2.3.5 Safety precautions when using the product according to Appointment	64
2.4 Dealing with emergencies 2	64
3 Maintenance	65
3.1 Maintenance of the product and its components 65	65
3.1.1 General instructions	65
3.1.2 Security measures	65
3.1.3 Product maintenance procedure	66
3.1.4 Checking the functionality of the product	70
3.1.5 Technical examination	71
3.1.6 Preservation (re-preservation, re-preservation)	71
4 Maintenance	73
5 Storage Christmas	74
6 Transportation	76
7 Disposal	77
Appendix A Battery Charging Instructions	78
Appendix B List of illustrations	84
Appendix to the List of accepted abbreviations	85
Annex E Reference regulatory documents	86
Change registration sheet	87

File:Pnv 10t manual (6).png

The user manual for the product PNV-10T is intended for studying the product, its correct operation and full use of its technical capabilities. It contains a description of the design of the product and the principle of its operation, technical specifications and other information necessary to ensure the full use of the technical capabilities of the product and keep it in constant readiness.

There are no special requirements for the level of training of service personnel.

File:Pnv 10t manual (7).png

1 DESCRIPTION AND OPERATION

1.1 Description and operation of the product

1.1.1 Purpose of the product

1.1.1.1 The product PNV-10T, which is a device for night

observation of the driver, is intended for the crew of armored vehicles to perform control inspection and daily maintenance of equipment at night, driving it in the position of the driver "in the stowed position", observing objects on the ground, as well as reading textual material and working with topographic maps.

1.1.1.2 When working with text documents and topographic maps, as well as when carrying out repair and engineering work in conditions where the illumination is insufficient for working in the passive mode, the product provides for the use of a built-in IR illumination source.

1.1.1.3 The product operates in the temperature range from minus 50 low to plus 50°C is recommended to prolong the time of continuous temperatures.

operation from autonomous power supply at source using the UE, which is part of the product kit.

1.1.1.4 The product is powered from an autonomous power source:

two batteries NMGTS-0.9 TU 3482-003-07626895-2001 (hereinafter referred to as the battery), or similar or two duplicate cells, size AA R6 1.5V, for example, A316 TU16.729.125-78 (hereinafter referred to as the battery) placed directly in the case of night glasses or V UE, as well as from the on-board network of the vehicle through the PNN fusing, if Their cable, adapter OR necessary, a serial connection).

1.1.1.5 For observation of terrain remote objects, the use of a removable telescopic nozzle included in the product kit is provided.

File:Pnv 10t manual (8).png

1.1.2 Specifications

1.1.2.1 Specifications are shown in Table 1.

Table 1
Name of technical data and characteristics	Rated Value		Permissible value		Measuring tool
Name of technical data and characteristics	Night glasses	Night glasses with nozzle	Night glasses	Night glasses with nozzle	Measuring tool
1 Identification range for human at EHO=(5‡2) x 103 lux in normalized X according GOST R50772-95 conditions, m, not less than	200	300			Photometer, marked track
2 Field of view angle, degree			37-40	8-10	UKNP-1
3 Product magnification, times	1.0	2.5	0.9-1.0	2.3-2.7	UKNP-1
4 Diopter aiming limits, diopter			±5	±5	UKNP-1
5 Eye base adjustment, mm, within			58-72	58-72	Calipers
6 Focusing the lens for sharpness in range, m	0.25-∞	10-∞			UKNP-1
7 Electrical power supply of the product
- from an independent power source (two batteries ), V, within			2.2-3.2	2.2-3.2	Voltmeter B7-22A
- through a low-voltage voltage converter from the onboard DC network, voltage, V, within			22-29 10.0-14.5	22-29 10.0-14.5	Voltmeter B7-22A

File:Pnv 10t manual (9).png

Table 1 continued
Name of technical data and characteristics	Rated value		Permissible value		measuring tool
Name of technical data and characteristics	night glasses	night glasses with nozzle	night glasses	night glasses with nozzle	measuring tool
8 Product operation time before the replacement of the power source (two batteries)(without illuminator):					watch*
at positive temperatures up to 50°C, h, not less	18	18
at negative temperatures up to minus 50°C, h, not less	4	4
9 Overall dimensions of the product, mm, not more	217x185x105	265x158x105
10 Product weight, kg:					Scales RN-10TSIZU
in working position	0.98	1.3
in a bag	1.5	1.8
in a case	6.0	6.5

* - It is allowed to use non-standardized measuring instruments

File:Pnv 10t manual (10).png

1.1.3.1 Compound product must correspond specified table 2 and shown in figure 1

Table 2
Designation	Name	Qty.	Location
	Assembly units of the product PNV-10T
ARUK.203128.001	Pseudo binocular	1	APIOK. 305152.001
ARUK.301547.005	Headband	1	APIOK. 305152.001
	Spare Parts
ARUK. 297376.001	Drying cartridge	1	APIOK. 322443.001
	Replacement Parts Kit
ARUK. 202388.001	Nozzle	1	APIOK. 305152.001
	Tool Kit And Accessories
ARUC. 434746.001	Voltage converter low voltage	1	APIOK. 321226.007
ARUK. 302638.001	Transitional device	1	APIOK. 321226.007
ARUC. 685691.001	Cable	1	APIOK. 321226.007
ARUC. 302638.002	Adapter	1	APIOK. 321226.007
	Charger ¹	1	APIOK. 321226.007
ARUC. 741121.013	Napkin	3	APIOK. 322443.001
	Accumulator ( recharging battery) NMGTS-0.9 TY 3482-003-07626895-2001 ²	6	APIOK. 322443.001
	2 Element A316 TU16.729.125-78 or similar size	4	APIOK. 322443.001

File:Pnv 10t manual (11).png

Continuation of table 2
Designation	Name	Qty.	Location
	Styling kit
ARUC. 321226.007	Case	1	APIOK. 321226.009
ARUC. 305152.001	Bag	1	APIOK. 321226.007
ARUC. 322443.001	Case	1	APIOK. 321226.007
	Product packaging PNV-10T
ARUC. 321226.009	Box	1
Notes The product can be equipped with one of two types of chargers: charger AL5.121.161 (UZ) or unified onboard charger-discharge device KEUYu.563541.001 (UZR-UB). It is allowed to replace the NMGZ-0.9 battery TU 3482-003-07626895-2001 with the NMGGZ-1.5 battery (C) TU 3482-057-20503890-2004, IKFA.563342.002-03 or NMGTS-1.5 (1975) TU V 3482-034-20503890-2000. At the request of the customer, it is allowed to lay the product kit PNV-10T in two cases of ARYUK. 321226.014 instead of one case ARYUK.321226.007.

1.1.4 Design and operation of the product

1.1.4.1 The PNV-10T product is a passive night observation device with a built-in IR illumination source (illuminator), built according to a pseudo-binocular scheme: with one objective, one image intensifier tube and image distribution from the image intensifier tube screen to two eyes of the observer using an eyepiece made in the form of a compact binocular microscope, consisting of a collimator lens, a separating prism and two identical telescopic systems.

The principle of operation of the night device is based on the enhancement of brightness and the transformation of the spectral composition of the image of the observed objects using a small-sized biplanar FOD.

The block diagram of the PNV-10T product is shown in Figure 2.

File:Pnv 10t manual (12).png

1 - pseudobinocular; 2 - headband; 3 - nozzle;

4 - drying cartridge; 5 - recharging battery; 6 - cable;

7 - low-voltage voltage converter;

8 - adapter; 9 - charger (a - UZ, b - UZR-UB);

10 - transitional device; 11- napkin; 12 - battery;

13 - case; 14 - bag; 15 - case; 16 - product packaging PNV-10T

Figure 1 - Composition of the product PNV-10T

File:Pnv 10t manual (13).png


in Chart: Arrow pointing towards 12: Rays off objects and terrain Arrow pointing towards 11: From board networks Square containing 2 & 6: Image Intensifier Square containing 3, 4 & 5: Eyepiece

1 - lens; 2 - image intensifier tube (vacuum block of the product EPM-53G-V);

3 - collimator lens (magnifier); 4 separating prism;

5 - telescopic system; 6 - VIP; 7 - autonomous power supply;

8 - UE; 9 - PNN: 10 - cable; 11 - adapter; 12 - nozzle (removable)

2 - Structural diagram of the item PNV-10T

1.4.2 Lens 1 forms an image of objects and terrain on photocathode of image intensifier tube 2. Enhanced in brightness and transformed in spectral composition, this image is reproduced on the screen of the image intensifier tube and viewed by the observer through the eyepiece of the product using a magnifying glass 3, a separating prism 4 and two telescopic systems 5, which can be shifted relative to the prism or moved apart depending on the size of the eve observer base.

1.1.4.3 The design of the EPM-53G-V product includes a vacuum unit and VIP 6, which has a screen AFC device (depending on the illumination on the ground) and an image intensifier tube protection circuit from light overloads. To ensure the operation of the VIP and the illuminator, an autonomous Power Source 7 or the on-board network of the vehicle is used. When the product is autonomously powered, batteries

File:Pnv 10t manual (14).png

are placed in a special compartment in the body of the pseudobinocular or in UP 8, which is recommended for use at low temperatures to increase the operating time of the product without replacing power supplies. When the product is powered from the on-board network through PNN 9, if necessary, cable 10, adapter 11, or a combination thereof can be used.

1.1.4.4 The general view of the product PNV-10T shown in FIGURE 3. Structurally, the product is made in the form of a pseudo-binocular 1, which is attached to the observer's head using a headband 2.

1.1.4.4.1 The product has three manual adjustments:

- focusing the lens 3 on the sharpness of the image formed on the photocathode of the image intensifier tube;

- diopter setting of the eyepiece 4 on the sharpness of the image observed on the image intensifier tube screen;

- adiustment of the eyepiece (output observer's eyes. telescopic components systems) according to the base of the

1.1.4.4.2 Focusing of the lens is carried out due to its movement along the optical axis as the lens barrel rotates.

1.1.4.4.3 Diopter adjustment of the eyepiece is carried out simultaneously for two eyes by moving the lens along with the image intensifier tube along the optical axis and is provided by rotating the body 5.

1.1.4.4.4 The adjustment of the eyepiece along the base of the and is provided by eyes is carried outby the parallel path of the beams of the moving B in the direction from the separating systems B to it prism or by turning the knob 6 in accordance with Figure 3.

1.1.4.4.5 Mount mechanism 7, which is part of the headband 2, provides: The

File:Pnv 10t manual (15).png

File:Pnv 10t manual (16).png

File:Pnv 10t manual (17).png

File:Pnv 10t manual (18).png

File:Pnv 10t manual (19).png

File:Pnv 10t manual (20).png

File:Pnv 10t manual (21).png

File:Pnv 10t manual (22).png

File:Pnv 10t manual (23).png

File:Pnv 10t manual (24).png

File:Pnv 10t manual (25).png