PNV-10T

Manual

Page

Translation

File:Pnv 10t manual (1).png

DRIVER OBSERVATION NIGHT VISION DEVICE

PNV-10T

Manual

File:Pnv 10t manual (2).png

File:Pnv 10t manual (3).png


Introduction	5
1 Description and operation	6
1.1 Description and operation of the product	6
1.1.1 Purpose of the product	6
1.1.2 Specifications	7
1.1.3 Product composition	9
1.1.4 Design and operation of the product	10
1.1.5 Measuring instruments, tools and accessories	16
1.1.6 Marking and sealing	17
1.1.7 Packaging	18
1.2 Description and operation of the component parts of the product	21
1.2.1 Pseudo-binocular ONA	21
1.2.2 Headband	24
1.2.3 Drying cartridge	24
1.2.4 Nozzle	27
1.2.5 Low-voltage voltage converter	27
1.2.6 Transfer device	32
1.2.7 Cable	34

File:Pnv 10t manual (4).png

1.2.8 Adapter	34
1.2.9 Charger	34
1.2.10 Napkin	41
1.2.11 Case	41
1.2.12 Bag	43
1.2.13 Case	43
1.2.14 Marking and sealing of components	43
2 Intended use	4
2.1 Operating restrictions	47
2.2 Preparing the product for use	48
2.2.1 Safety precautions when preparing the product	48
2.2.2 Scope and sequence of external inspection of the product	49
2.2.3 Preparing the product for use when powered by independent power source	50
2.2.4 Preparing to work with the product from the on-board network	53
2.2.5 Preparing the product for operation with an adapter device	54
2.2.6 Preparation for operation of the product with a nozzle when powered by autonomous power supply	55
2.2.7 Instructions for switching on and testing the operation of the product	55
2.2.8 List of possible malfunctions of the product in the process fits preparation and recommendations on actions in case of their occurrence	56
2.3 Using the product	59
2.3.1 The procedure for operating personnel when performing the tasks of using the product	59
2.3.2 Product health check	59

File:Pnv 10t manual (5).png

2.3.3 List of possible faults in the process use of the product for its intended purpose and recommendations for actions when they occur	60
2.3.4 List of product operation modes	63
2.3.5 Safety precautions when using the product according to Appointment	64
2.4 Dealing with emergencies 2	64
3 Maintenance	65
3.1 Maintenance of the product and its components 65	65
3.1.1 General instructions	65
3.1.2 Security measures	65
3.1.3 Product maintenance procedure	66
3.1.4 Checking the functionality of the product	70
3.1.5 Technical examination	71
3.1.6 Preservation (re-preservation, re-preservation)	71
4 Maintenance	73
5 Storage Christmas	74
6 Transportation	76
7 Disposal	77
Appendix A Battery Charging Instructions	78
Appendix B List of illustrations	84
Appendix to the List of accepted abbreviations	85
Annex E Reference regulatory documents	86
Change registration sheet	87

File:Pnv 10t manual (6).png

The user manual for the product PNV-10T is intended for studying the product, its correct operation and full use of its technical capabilities. It contains a description of the design of the product and the principle of its operation, technical specifications and other information necessary to ensure the full use of the technical capabilities of the product and keep it in constant readiness.

There are no special requirements for the level of training of service personnel.

File:Pnv 10t manual (7).png

1 DESCRIPTION AND OPERATION

1.1 Description and operation of the product

1.1.1 Purpose of the product

1.1.1.1 The product PNV-10T, which is a device for night

observation of the driver, is intended for the crew of armored vehicles to perform control inspection and daily maintenance of equipment at night, driving it in the position of the driver "in the stowed position", observing objects on the ground, as well as reading textual material and working with topographic maps.

1.1.1.2 When working with text documents and topographic maps, as well as when carrying out repair and engineering work in conditions where the illumination is insufficient for working in the passive mode, the product provides for the use of a built-in IR illumination source.

1.1.1.3 The product operates in the temperature range from minus 50 low to plus 50°C is recommended to prolong the time of continuous temperatures.

operation from autonomous power supply at source using the UE, which is part of the product kit.

1.1.1.4 The product is powered from an autonomous power source:

two batteries NMGTS-0.9 TU 3482-003-07626895-2001 (hereinafter referred to as the battery), or similar or two duplicate cells, size AA R6 1.5V, for example, A316 TU16.729.125-78 (hereinafter referred to as the battery) placed directly in the case of night glasses or V UE, as well as from the on-board network of the vehicle through the PNN fusing, if Their cable, adapter OR necessary, a serial connection).

1.1.1.5 For observation of terrain remote objects, the use of a removable telescopic nozzle included in the product kit is provided.

File:Pnv 10t manual (8).png

File:Pnv 10t manual (9).png

File:Pnv 10t manual (10).png

File:Pnv 10t manual (11).png

File:Pnv 10t manual (12).png

File:Pnv 10t manual (13).png

File:Pnv 10t manual (14).png

File:Pnv 10t manual (15).png

File:Pnv 10t manual (16).png

File:Pnv 10t manual (17).png

File:Pnv 10t manual (18).png