AN/PVS-7: Difference between revisions
From Night Vision Wiki
No edit summary |
imported>Terminatort80022 No edit summary |
||
Line 5: | Line 5: | ||
<gallery mode="slideshow"> | <gallery mode="slideshow"> | ||
File:Pvs-7 Collimator assembly.jpeg|alt=black tube with a prism at one end, internal consist of convex lens | File:Pvs-7 Collimator assembly.jpeg|alt=black tube with a prism at one end, internal consist of convex lens|PVS-7 collimator assembly, comprising of multiple lens and a triangular prism to duplicate intensifier image from one 10130 tube to both eyes | ||
File:Internal components of collimator and order of assembly.jpeg|alt=a series of convex lens of different convex degree and thickness followed by their stabilisation rings | File:Internal components of collimator and order of assembly.jpeg|alt=a series of convex lens of different convex degree and thickness followed by their stabilisation rings|when disassembled, the following components, comprising of lenses and rings would pop out in the following order | ||
File:First step of assembly.jpeg | File:First step of assembly.jpeg|for the 1 component, insert the lens with the convex side facing towards the collimator housing | ||
File:Step 2 of assembly.jpeg | File:Step 2 of assembly.jpeg|for the 2 step, insert one of the thick metal ring into the collimator housing | ||
File:Step 3 of assembly.jpeg | File:Step 3 of assembly.jpeg|for step 3, inset the thick lens, convex side facing towards the collimator housing | ||
File:Step 4; part 1 assembly step.jpeg | File:Step 4; part 1 assembly step.jpeg|for step 4, [1] there will be three components needed to be placed together in a bundle | ||
File:Step 4; part 2 assembly step.jpeg | File:Step 4; part 2 assembly step.jpeg|for step 4, [2], place the metal ring onto a flat surface for convenience | ||
File:Step 4; part 3 assembly step.jpeg | File:Step 4; part 3 assembly step.jpeg|for step 4, [3], place the lens onto the metal ring with the convex side facing towards the metal ring | ||
File:Step 4; part 4 assembly step.jpeg | File:Step 4; part 4 assembly step.jpeg|for step 4, [4] place the thin metal ring onto the lens | ||
File:Step 4; results.jpeg|final results should look like the following with each component stacked according to their collerated numbers in [1] | |||
</gallery> | </gallery> | ||
[[Category:Devices]] | [[Category:Devices]] |
Revision as of 12:18, 9 September 2022
Made by Litton Industries.