AN/PVS-7: Difference between revisions

From Night Vision Wiki
imported>Terminatort80022
No edit summary
imported>Terminatort80022
No edit summary
Line 15: Line 15:
File:Step 4; part 4 assembly step.jpeg|for step 4, [4] place the thin metal ring onto the lens
File:Step 4; part 4 assembly step.jpeg|for step 4, [4] place the thin metal ring onto the lens
File:Step 4; results.jpeg|final results should look like the following with each component stacked according to their collerated numbers in [1]
File:Step 4; results.jpeg|final results should look like the following with each component stacked according to their collerated numbers in [1]
File:Step 5 of assembly.jpeg|for step 5, insert the fully stacked components in step 4 with the thin metal ring facing towards the collimator housing
File:Step 6 of assembly.jpeg|for step 6, insert the final lens into the collimator housing with the convex side facing outward of the housing
File:Step 7 of assembly.jpeg|for the final step, screw in the lock ring which helps to keep all the components in place securely
</gallery>
</gallery>
[[Category:Devices]]
[[Category:Devices]]

Revision as of 12:25, 9 September 2022

Made by Litton Industries.

Collimator