Infiray Jerry-F: Difference between revisions
(Edit: Infiray Jerry F) |
m (Formatting) |
||
| (11 intermediate revisions by 5 users not shown) | |||
| Line 1: | Line 1: | ||
Infiray Jerry F-ENVG | [[File:EF2E910C-8A16-420A-A5D9-C2C985E1D656.jpg|alt=|thumb|Infiray Jerry-F with mount and battery pack]] | ||
The Infiray Jerry-F (also referred to as F-ENVG, standing for Fused Enhanced Night Vision Goggles) is a fused night vision and thermal monocular produced by [[Infiray]]. | |||
Fused systems like the Jerry-F are an attempt to improve upon the combination of night vision devices and clip-on thermal imagers by providing a complete package. | |||
The Infiray Jerry-F housing weights 372 g and has a waterproof certification of IP67. Also it comes with its own mounting system (239 g) and a external battery pack which is not compatible to other devices. Diopter is adjustable from -3.5 to +2.5 | |||
The | The lenses used for night vision component aren’t as good as mil-spec lenses on established devices like the [[AN/PVS-14|PVS-14]]. | ||
The | The built in thermal sensor has a resolution of 640 x 512 pixels (12 μm). A 16mm thermal lens diameter with adjustable focus has a [[Field of View (FOV)|FoV]] of 25,8° x 19,1° where the analog image has 40°. | ||
For fused operation it has four thermal-modes where the color scheme can be changed. It also features a full thermal mode if image intensification isn‘t required. | |||
The | ===== Fusion analog modes and color settings ===== | ||
The brightness adjustment for the thermal have different uses on specific modes. | |||
The | * Outline-mode (orange/white-hot) knob stays for brightness/outline intensity | ||
* Highlight-mode (orange/white-hot) knob stays for brightness | |||
* Breath-mode (orange/white/black-hot) knob changes breath speed 0-100% | |||
Thermal mode and color setting: | |||
* Orange/white/black-hot knob stays for brightness | |||
* x1 and x2 zoom | |||
The Jerry F has 3 push/turn and knobs which cover all functions. | |||
The button on the inputs/objective side can be turned counterclockwise and gives a "click" feedback. | |||
This switches on the thermal imaging module and if turn further, it controls the brightness of it at the same time. | |||
A short press changes the thermal image colors: (orange/white/black-hot) and a long press takes it to the menu. | |||
The top button on the output/eyepiece side solely controls the IR reading light with a clockwise toggle. | |||
The bottom knob on the outputs/eyepiece side contains most of the controls and is for turning on the analog image intensifier with a clockwise turn giving a "click" feedback, further turning simultaneously controls MGC/analogue brightness. | |||
A short press with the thermal module switched on (Fusion modes), changes between the Fusion modes: (Outline,highlight,breath), a long press calibrates the sensor manually to the environment. | |||
If the button is switched off while the thermal module is switched on, it immediately switches to full thermal mode where a short press in that mode controls zoom (x1/x2). | |||
===== Menu settings ===== | |||
There isn’t much to change in settings. | |||
# Outline modes line intensity | |||
# PAL video output | |||
# Switch on/off HUD with battery indicator, compass and other indicators | |||
# Calibrate compass | |||
# Exit | |||
The battery life during fused operation is over 8 hours while the image intensification without thermal extends battery life to over 60 hours. | |||
[[File:C82EAFD3-C076-4178-A25E-CA412D05555E.png|thumb|Head-Mounted Jerry F-ENVG Setup: Crye Precision Nightcap, Crye Precision Batterypack Pouch, Wilcox 3-Hole shroud, Jerry F mounting system (Included in accessories). Setup from side view]] | |||
[[Category:devices]] | [[Category:devices]] | ||
Latest revision as of 13:26, 29 February 2024
The Infiray Jerry-F (also referred to as F-ENVG, standing for Fused Enhanced Night Vision Goggles) is a fused night vision and thermal monocular produced by Infiray.
Fused systems like the Jerry-F are an attempt to improve upon the combination of night vision devices and clip-on thermal imagers by providing a complete package.
The Infiray Jerry-F housing weights 372 g and has a waterproof certification of IP67. Also it comes with its own mounting system (239 g) and a external battery pack which is not compatible to other devices. Diopter is adjustable from -3.5 to +2.5
The lenses used for night vision component aren’t as good as mil-spec lenses on established devices like the PVS-14.
The built in thermal sensor has a resolution of 640 x 512 pixels (12 μm). A 16mm thermal lens diameter with adjustable focus has a FoV of 25,8° x 19,1° where the analog image has 40°.
For fused operation it has four thermal-modes where the color scheme can be changed. It also features a full thermal mode if image intensification isn‘t required.
Fusion analog modes and color settings[edit | edit source]
The brightness adjustment for the thermal have different uses on specific modes.
- Outline-mode (orange/white-hot) knob stays for brightness/outline intensity
- Highlight-mode (orange/white-hot) knob stays for brightness
- Breath-mode (orange/white/black-hot) knob changes breath speed 0-100%
Thermal mode and color setting:
- Orange/white/black-hot knob stays for brightness
- x1 and x2 zoom
The Jerry F has 3 push/turn and knobs which cover all functions.
The button on the inputs/objective side can be turned counterclockwise and gives a "click" feedback.
This switches on the thermal imaging module and if turn further, it controls the brightness of it at the same time.
A short press changes the thermal image colors: (orange/white/black-hot) and a long press takes it to the menu.
The top button on the output/eyepiece side solely controls the IR reading light with a clockwise toggle.
The bottom knob on the outputs/eyepiece side contains most of the controls and is for turning on the analog image intensifier with a clockwise turn giving a "click" feedback, further turning simultaneously controls MGC/analogue brightness.
A short press with the thermal module switched on (Fusion modes), changes between the Fusion modes: (Outline,highlight,breath), a long press calibrates the sensor manually to the environment.
If the button is switched off while the thermal module is switched on, it immediately switches to full thermal mode where a short press in that mode controls zoom (x1/x2).
Menu settings[edit | edit source]
There isn’t much to change in settings.
- Outline modes line intensity
- PAL video output
- Switch on/off HUD with battery indicator, compass and other indicators
- Calibrate compass
- Exit
The battery life during fused operation is over 8 hours while the image intensification without thermal extends battery life to over 60 hours.
