Infiray Jerry-F: Difference between revisions
imported>Turkish Drone (new informations added) |
m (Formatting) |
||
| (3 intermediate revisions by 3 users not shown) | |||
| Line 4: | Line 4: | ||
Fused systems like the Jerry-F are an attempt to improve upon the combination of night vision devices and clip-on thermal imagers by providing a complete package. | Fused systems like the Jerry-F are an attempt to improve upon the combination of night vision devices and clip-on thermal imagers by providing a complete package. | ||
The Infiray Jerry-F housing weights 372 g and has a waterproof certification of IP67. Also it comes with its own mounting system (239 g) and a external battery pack which is not compatible to other devices. | The Infiray Jerry-F housing weights 372 g and has a waterproof certification of IP67. Also it comes with its own mounting system (239 g) and a external battery pack which is not compatible to other devices. Diopter is adjustable from -3.5 to +2.5 | ||
The lenses used for night vision component aren’t as good as mil-spec lenses on established devices like the [[AN/PVS-14|PVS-14]]. | The lenses used for night vision component aren’t as good as mil-spec lenses on established devices like the [[AN/PVS-14|PVS-14]]. | ||
| Line 12: | Line 12: | ||
For fused operation it has four thermal-modes where the color scheme can be changed. It also features a full thermal mode if image intensification isn‘t required. | For fused operation it has four thermal-modes where the color scheme can be changed. It also features a full thermal mode if image intensification isn‘t required. | ||
Fusion analog modes and color settings | ===== Fusion analog modes and color settings ===== | ||
The brightness adjustment for the thermal have different uses on specific modes. | |||
* Outline-mode (orange/white-hot) knob stays for brightness/outline intensity | |||
* Highlight-mode (orange/white-hot) knob stays for brightness | |||
* Breath-mode (orange/white/black-hot) knob changes breath speed 0-100% | |||
Thermal mode and color setting: | Thermal mode and color setting: | ||
* Orange/white/black-hot knob stays for brightness | |||
* x1 and x2 zoom | |||
The Jerry F has 3 push/turn and knobs which cover all functions. | The Jerry F has 3 push/turn and knobs which cover all functions. | ||
| Line 42: | Line 38: | ||
A short press with the thermal module switched on (Fusion modes), changes between the Fusion modes: (Outline,highlight,breath), a long press calibrates the sensor manually to the environment. | A short press with the thermal module switched on (Fusion modes), changes between the Fusion modes: (Outline,highlight,breath), a long press calibrates the sensor manually to the environment. | ||
If the button is switched off while the thermal module is switched on, it immediately switches to full thermal mode where a short press in that mode controls zoom (x1/x2) | If the button is switched off while the thermal module is switched on, it immediately switches to full thermal mode where a short press in that mode controls zoom (x1/x2). | ||
===== Menu settings ===== | |||
There isn’t much to change in settings. | There isn’t much to change in settings. | ||
| Line 56: | Line 51: | ||
The battery life during fused operation is over 8 hours while the image intensification without thermal extends battery life to over 60 hours. | The battery life during fused operation is over 8 hours while the image intensification without thermal extends battery life to over 60 hours. | ||
[[File:C82EAFD3-C076-4178-A25E-CA412D05555E.png|thumb|Head-Mounted Jerry F-ENVG Setup: Crye Precision Nightcap, Crye Precision Batterypack Pouch, Wilcox 3-Hole shroud, Jerry F mounting system (Included in accessories). Setup from side view]] | [[File:C82EAFD3-C076-4178-A25E-CA412D05555E.png|thumb|Head-Mounted Jerry F-ENVG Setup: Crye Precision Nightcap, Crye Precision Batterypack Pouch, Wilcox 3-Hole shroud, Jerry F mounting system (Included in accessories). Setup from side view]] | ||
[[Category:devices]] | [[Category:devices]] | ||
Latest revision as of 13:26, 29 February 2024
The Infiray Jerry-F (also referred to as F-ENVG, standing for Fused Enhanced Night Vision Goggles) is a fused night vision and thermal monocular produced by Infiray.
Fused systems like the Jerry-F are an attempt to improve upon the combination of night vision devices and clip-on thermal imagers by providing a complete package.
The Infiray Jerry-F housing weights 372 g and has a waterproof certification of IP67. Also it comes with its own mounting system (239 g) and a external battery pack which is not compatible to other devices. Diopter is adjustable from -3.5 to +2.5
The lenses used for night vision component aren’t as good as mil-spec lenses on established devices like the PVS-14.
The built in thermal sensor has a resolution of 640 x 512 pixels (12 μm). A 16mm thermal lens diameter with adjustable focus has a FoV of 25,8° x 19,1° where the analog image has 40°.
For fused operation it has four thermal-modes where the color scheme can be changed. It also features a full thermal mode if image intensification isn‘t required.
Fusion analog modes and color settings[edit | edit source]
The brightness adjustment for the thermal have different uses on specific modes.
- Outline-mode (orange/white-hot) knob stays for brightness/outline intensity
- Highlight-mode (orange/white-hot) knob stays for brightness
- Breath-mode (orange/white/black-hot) knob changes breath speed 0-100%
Thermal mode and color setting:
- Orange/white/black-hot knob stays for brightness
- x1 and x2 zoom
The Jerry F has 3 push/turn and knobs which cover all functions.
The button on the inputs/objective side can be turned counterclockwise and gives a "click" feedback.
This switches on the thermal imaging module and if turn further, it controls the brightness of it at the same time.
A short press changes the thermal image colors: (orange/white/black-hot) and a long press takes it to the menu.
The top button on the output/eyepiece side solely controls the IR reading light with a clockwise toggle.
The bottom knob on the outputs/eyepiece side contains most of the controls and is for turning on the analog image intensifier with a clockwise turn giving a "click" feedback, further turning simultaneously controls MGC/analogue brightness.
A short press with the thermal module switched on (Fusion modes), changes between the Fusion modes: (Outline,highlight,breath), a long press calibrates the sensor manually to the environment.
If the button is switched off while the thermal module is switched on, it immediately switches to full thermal mode where a short press in that mode controls zoom (x1/x2).
Menu settings[edit | edit source]
There isn’t much to change in settings.
- Outline modes line intensity
- PAL video output
- Switch on/off HUD with battery indicator, compass and other indicators
- Calibrate compass
- Exit
The battery life during fused operation is over 8 hours while the image intensification without thermal extends battery life to over 60 hours.
