AN/PVS-7: Difference between revisions

From Night Vision Wiki
← Older editNewer edit →
Admin (talk | contribs)
Bureaucrats, Interface administrators, Administrators
210 edits
VisualWikitext
imported>Terminatort80022
inclusion of collimator pics 9
No edit summary
Line 1: Line 1:
[[File:Pvs-7 Collimator assembly.jpeg|alt=black tube with a prism at one end, internal consist of convex lens |thumb|278x278px|PVS-7 collimator assembly, comprising of multiple lens and a triangular prism to duplicate intensifier image from one 10130 tube to both eyes]]
 
[[File:Internal components of collimator and order of assembly.jpeg|alt=a series of convex lens of different convex degree and thickness followed by their stabilisation rings|thumb|322x322px|when disassembled, the following components, comprising of lenses and rings would pop out in the following order]]
[[File:First step of assembly.jpeg|thumb|414x414px|for the 1 component, insert the lens with the convex side facing towards the collimator housing|alt=]]
[[File:Step 2 of assembly.jpeg|thumb|299x299px|for the 2 step, insert one of the thick metal ring into the collimator housing|alt=]]
[[File:Step 3 of assembly.jpeg|thumb|256x256px|for step 3, inset the thick lens, convex side facing towards the collimator housing]]
[[File:Step 4; part 1 assembly step.jpeg|thumb|255x255px|for step 4, [1] there will be three components needed to be placed together in a bundle ]]
[[File:Step 4; part 2 assembly step.jpeg|thumb|307x307px|for step 4, [2], place the metal ring onto a flat surface for convenience ]]
[[File:Step 4; part 3 assembly step.jpeg|thumb|358x358px|for step 4, [3], place the lens onto the metal ring with the convex side facing towards the metal ring]]
[[File:Step 4; part 4 assembly step.jpeg|thumb|357x357px|for step 4, [4] place the thin metal ring onto the lens]]
Made by Litton Industries.  
Made by Litton Industries.  


== Collimator ==
<gallery mode="slideshow">
File:Pvs-7 Collimator assembly.jpeg|alt=black tube with a prism at one end, internal consist of convex lens |thumb|278x278px|PVS-7 collimator assembly, comprising of multiple lens and a triangular prism to duplicate intensifier image from one 10130 tube to both eyes
File:Internal components of collimator and order of assembly.jpeg|alt=a series of convex lens of different convex degree and thickness followed by their stabilisation rings|thumb|322x322px|when disassembled, the following components, comprising of lenses and rings would pop out in the following order
File:First step of assembly.jpeg|thumb|414x414px|for the 1 component, insert the lens with the convex side facing towards the collimator housing|alt=
File:Step 2 of assembly.jpeg|thumb|299x299px|for the 2 step, insert one of the thick metal ring into the collimator housing|alt=
File:Step 3 of assembly.jpeg|thumb|256x256px|for step 3, inset the thick lens, convex side facing towards the collimator housing
File:Step 4; part 1 assembly step.jpeg|thumb|255x255px|for step 4, [1] there will be three components needed to be placed together in a bundle
File:Step 4; part 2 assembly step.jpeg|thumb|307x307px|for step 4, [2], place the metal ring onto a flat surface for convenience
File:Step 4; part 3 assembly step.jpeg|thumb|358x358px|for step 4, [3], place the lens onto the metal ring with the convex side facing towards the metal ring
File:Step 4; part 4 assembly step.jpeg|thumb|357x357px|for step 4, [4] place the thin metal ring onto the lens
</gallery>
[[Category:Devices]]
[[Category:Devices]]

Revision as of 11:54, 9 September 2022

Made by Litton Industries.

Collimator

  • black tube with a prism at one end, internal consist of convex lens
    PVS-7 collimator assembly, comprising of multiple lens and a triangular prism to duplicate intensifier image from one 10130 tube to both eyes
  • a series of convex lens of different convex degree and thickness followed by their stabilisation rings
    when disassembled, the following components, comprising of lenses and rings would pop out in the following order
  • for the 1 component, insert the lens with the convex side facing towards the collimator housing
  • for the 2 step, insert one of the thick metal ring into the collimator housing
  • for step 3, inset the thick lens, convex side facing towards the collimator housing
    for step 3, inset the thick lens, convex side facing towards the collimator housing
  • for step 4, [1] there will be three components needed to be placed together in a bundle
    for step 4, [1] there will be three components needed to be placed together in a bundle
  • for step 4, [2], place the metal ring onto a flat surface for convenience
    for step 4, [2], place the metal ring onto a flat surface for convenience
  • for step 4, [3], place the lens onto the metal ring with the convex side facing towards the metal ring
    for step 4, [3], place the lens onto the metal ring with the convex side facing towards the metal ring
  • for step 4, [4] place the thin metal ring onto the lens
    for step 4, [4] place the thin metal ring onto the lens
Retrieved from "https://nv-intl.com/index.php?title=AN/PVS-7&oldid=597"